"> Razer Basilisk V2 Drivers Download Windows & Mac

Razer Basilisk V2 Drivers Download Windows & Mac

Razer Basilisk V2 Drivers, Software, Setup & Manual Support. Razer Basilisk V2 works fine, but it’s a good idea to install the free Razer Synapse software. With it, you can adjust mouse buttons, DPI settings, and lighting. On the Customization tab, you can not only reprogram four mouse buttons but you can also adjust the scroll up and scroll down functions on the wheel, which usually cannot be adjusted for any mouse, especially what is a budget model.

Razer Basilisk V2 Drivers Download Windows & Mac

Basilisk V2 is home to a myriad of programmable buttons, all of which are tactile and fun to the touch. Starting from the normal and expected mouse button up to two above the mouse that controls the DPI level, from 800 to 20,000. There is also a button on the bottom of the unit to switch between five different onboard profiles that can be configured through Rapse’s Synapse 3 software.

The Basilisk V2 scroll wheel also deserves recognition because of its design flexibility. At the bottom of the mouse, there is a smaller wheel that allows you to adjust the resistance of the main scroll wheel. You can set it to extra rigid scrolling, free-scrolling that is almost without friction or anything in between.

OS CompatibleDrivers Download
  • Windows 10 (32/64-bit)
  • Windows  8 (32/64-bit)
  • Windows  7 (32/64-bit)
  • Vista (32/64-bit)
  • XPSP3 (32-bit)
  • XP Professional x64 Edition (64-bit)
  • Mac OS X 10.6.x-10.10. x

Razer Basilisk V2 Drivers Download – Provide the main driver and software that you can straight download from this link below. Naturally, the steps by step are additionally simple to follow.

Razer Basilisk V2 Download Windows:

File Download Link
Razer Synapse 3 Windows 7,8,10 Download

Razer Basilisk V2 Download Mac:

File Download Link
Razer Synapse 3 (Mac OSX 10.6/10.7) Download

Drivers Installation And Setup

  • Open Razer Synapse 3.
  • Select your connected Razer computer Mice & Mats.
  • Pick the Macros menu header.
  • Strike “+” to put in a new macro.
  • Decide how you want the delay between keystrokes to be listed:
    • Record delay — Records delay after recording.
    • Default delay — Place delay utilized between keystrokes.
    • No delay — Synapse will not have some delay between keystrokes.
  • Hit listing and trigger keys at the desired sequence.
  • Select stop when you are done.
  • Pick the Keyboard menu header.
  • Select the key you would like to get utilized for your macro.
  • Choose the drop-down menu.
  • Pick” Macro.”
  • Change “assign macro” into the one that you just made.
  • Select the desired playback choice.

Razer Basilisk V2 Drivers runs on the intuitive Razer Synapse 3.0 software, though you’ll most likely be just fine if you never put in it. You may create various profiles and connect them to matches, in addition to record macros. But with no excess macro keys, there is not much reason to do this; if you need macro keys, then you are better off springing to the Chroma version.

Recommended: Razer Basilisk V2 User Manual Guide

User Rating 5 (1 vote)