Our Top Picks
A resin printer turns a bottle of liquid photopolymer into tabletop miniatures, terrain, and replacement parts with detail a filament printer cannot match. The resin you pour into the vat shapes the result as much as the printer does: it decides how crisp the fine lines on a miniature come out, whether a thin sword survives a drop onto the table, and how much cleanup the finished print needs. This guide compares five resins that suit gaming work, from everyday standard grey to tougher ABS-like formulas and a water-washable option that skips the alcohol wash.
Every pick below is a 1000 g bottle of grey photopolymer resin built around the 405 nm wavelength standard that LCD, MSLA, DLP, and SLA printers use. Grey is the working color for miniatures: it shows surface detail clearly while you inspect a print, and it takes primer evenly when the piece is ready for paint. The five bottles cover the three formulas a gaming printer owner actually needs, so you can match the resin to the job instead of forcing one bottle to do everything.
As an Amazon Associate, we earn from qualifying purchases.
Handle resin safely before you print
Uncured photopolymer resin is a skin and respiratory irritant, and repeated skin contact can turn into a lasting sensitivity, so treat every bottle with respect. Wear nitrile gloves whenever you handle liquid resin, pour it, or touch an uncured print. Work in a ventilated space, and wear eye protection when you pour or wash prints, since a splash in the eyes is a real hazard. If resin touches your skin, wash the area with soap and water right away rather than wiping it with alcohol, which can spread it.
Never pour resin, rinse water, or wash liquid down a drain. Waste resin and wash water must be cured first: leave the container in direct sunlight or under a UV lamp until the liquid has hardened, then dispose of the solid waste under your local hazardous-waste rules. Store bottles upright, sealed, and away from light and heat. None of the resins in this guide is described as non-toxic or food-safe, and no cured miniature should be used with food or drink.
How to choose resin for gaming miniatures
Start with the formula. Standard resin is the everyday choice: it holds fine detail well, cures reliably, and suits display miniatures and terrain that mostly sit on the shelf or the table. ABS-like resin is the tougher cousin. It resists chipping and snapping, which matters for gaming pieces that get picked up, moved, and knocked over every session. Thin weapons, antennae, and spindly legs last longer in ABS-like resin, and the trade-off in surface detail is small on most printers. Water-washable resin changes the cleanup step rather than the print itself: finished pieces rinse in water instead of isopropyl alcohol, which simplifies the wash station and removes one chemical from the bench. The wash water still carries uncured resin, so it needs the same cure-before-disposal treatment as alcohol wash.
Wavelength is the compatibility check. The 405 nm standard covers nearly every LCD and MSLA printer sold today, and all five picks here cure at 405 nm. The water-washable pick in this guide lists a 365–405 nm range, which widens its printer compatibility. Check your printer manual for its light source before ordering a bottle, and confirm the resin suits your machine.
Detail depends more on your printer than on the resin brand. A 4K, 8K, or 12K capable printer resolves finer layers than the resin needs to hold, so any of these five will print the same miniature file with the detail your machine can deliver. Where resins differ is toughness, odor, and cleanup. Odor is a listing claim that varies by brand, and this guide attributes it where the listing makes it; ventilation matters with every resin regardless of what the label says. Bottle size is the last practical point: 1000 g is the standard bottle, and one bottle prints a large run of 28 mm scale miniatures before it runs low.
1. ELEGOO Standard 3D Printer Resin Grey 1000g
ELEGOO Standard Grey is the reference bottle for everyday miniature printing. It is a straightforward 405 nm photopolymer resin with no special handling beyond the usual safety steps, and its grey tone is the standard against which other resins are judged for detail visibility. Fine lines, facial features, and engraved armor panels come out cleanly, and the cured surface takes primer without fuss. If you print mostly display pieces, terrain, and miniatures that live in a case between sessions, this is the bottle to keep on the shelf.
The listing names compatibility with ELEGOO Mars, Saturn, and Jupiter MSLA, DLP, and LCD machines, and the 405 nm cure suits the wider LCD printer market. Use the current short title when you look it up, since the listing has been retitled over time. The bottle is 1000 g of grey resin, and the listed weight is 1.98 lb.
Specs
- Type: Standard photopolymer resin, Grey
- Bottle size: 1000 g
- Curing wavelength: 405 nm
- Model: US-EL-3D-052
- Listed weight: 1.98 lb
- Printer type: LCD, MSLA, DLP
2. Siraya Tech Fast ABS-Like Grey 1kg
Siraya Tech Fast ABS-Like is the pick for miniatures that get handled. The ABS-like formula is built to be non-brittle, so thin parts that would snap in standard resin bend slightly instead of breaking. That toughness is exactly what gaming pieces need: a miniature that survives being knocked off the table is worth more than one with a fractionally crisper edge. The listing describes it as low odor, and it is rated 8K capable, which matches the current generation of high-resolution LCD printers.
This is the bottle to reach for when you print player characters, frequently used monsters, and anything with thin protruding parts. It cures at the standard 405 nm wavelength, and the grey color keeps detail visible during inspection and priming. The 1 kg bottle is the same size as the standard picks, so it drops into the same workflow without any change to your wash and cure routine.
Specs
- Type: ABS-like photopolymer resin, Grey
- Bottle size: 1000 g (1 kg)
- Curing wavelength: 405 nm
- Resolution: 8K capable
- Odor: described as low odor on the listing
- Finish: non-brittle, high precision
3. ANYCUBIC Water Washable Resin 2.0 Grey 1000g
ANYCUBIC Water Washable Resin 2.0 changes the cleanup step. Finished prints rinse in water instead of isopropyl alcohol, which means no alcohol bath on the bench, no alcohol fumes during the wash, and no used alcohol to store and dispose of. The wash water still carries uncured resin, so it must be cured in sunlight or under a UV lamp before disposal, exactly like alcohol wash. The resin itself is a low-shrinkage photopolymer, and the listing names compatibility with 4K, 8K, and 12K capable printers.
Use the current title when you look it up: the listing is titled “Upgraded Water Washable Resin 2.0.” The curing range is 365–405 nm, which is wider than the 405 nm standard and suits a broader set of machines. For a gaming printer owner who prints often and wants the simplest wash routine, this is the most convenient bottle in the guide.
Specs
- Type: Water washable photopolymer resin, Grey
- Bottle size: 1000 g
- Curing wavelength: 365–405 nm
- Model: SSXGY-101A
- Shrinkage: low shrinkage, per the listing
- Printer resolution: 4K, 8K, and 12K capable printers
4. SUNLU ABS-Like Grey 1000g
SUNLU ABS-Like pairs the toughness of an ABS-like formula with the widest stated printer compatibility in this guide. The listing names 2K, 4K, 6K, and 8K LCD, DLP, and SLA printers, so it covers older machines as well as current high-resolution ones. Like the Siraya Tech pick, it is a non-brittle resin, which makes it a strong choice for gaming miniatures that get handled every session. It cures at 405 nm and uses the rapid-curing photopolymer formula the listing describes.
This bottle earns its place as the second tough option because it gives you a choice of ABS-like resin rather than a single source. If your printer is an older 2K machine, the stated 2K compatibility is the detail that matters. The grey color and 1000 g bottle match the rest of the lineup, and the listed weight is 2.2 lb.
Specs
- Type: ABS-like photopolymer resin, Grey
- Bottle size: 1000 g
- Curing wavelength: 405 nm
- Printer resolution: 2K, 4K, 6K, and 8K
- Printer type: LCD, DLP, SLA
- Listed weight: 2.2 lb
- Finish: non-brittle
5. ANYCUBIC Standard Grey 1kg
ANYCUBIC Standard Grey is the second everyday standard in the guide, and it gives you a choice of standard resin from a different maker. The listing describes high precision, quick curing, and excellent fluidity, which is the combination that keeps fine miniature detail sharp and the vat flowing evenly during long prints. It cures at the standard 405 nm wavelength, and the grey tone shows detail well during inspection and takes primer evenly.
The listing carries a “Newer Version Available” pointer to a V2 resin. This pick is the original standard formula, and the V2 claims belong to a different product, so do not mix them. The bottle is 1 kg of grey resin, and the listed weight is 2 lb. For a gaming printer owner who already runs an ANYCUBIC machine, this is the natural standard bottle to pair with the water-washable pick above.
Specs
- Type: Standard photopolymer resin, Grey
- Bottle size: 1000 g (1 kg)
- Curing wavelength: 405 nm
- Listed weight: 2 lb
- Curing: quick curing, per the listing
- Fluidity: excellent fluidity, per the listing
Comparing the five resins
The lineup splits into three formulas. ELEGOO Standard and ANYCUBIC Standard are the everyday standards: pick either for display miniatures, terrain, and pieces that mostly stay in a case. Siraya Tech Fast ABS-Like and SUNLU ABS-Like are the tough pair: pick either for gaming pieces that get handled, dropped, and transported. ANYCUBIC Water Washable 2.0 stands alone as the cleanup pick: it prints like a standard resin and rinses in water.
Wavelength is the same story across the board. Four of the five cure at 405 nm, and the water-washable pick covers 365–405 nm, so any of them suits a standard LCD or MSLA printer. Resolution claims vary by listing, from 2K coverage on the SUNLU bottle to 12K capable on the water-washable pick, but your printer sets the detail ceiling, not the resin. Every bottle is 1000 g of grey, so the choice comes down to formula and cleanup, not size or color.
FAQ
What kind of resin is best for gaming miniatures?
Standard grey resin suits display miniatures and terrain that mostly sit still. ABS-like resin suits gaming pieces that get picked up and moved every session, because it resists chipping and snapping on thin parts. Water-washable resin suits anyone who wants to skip the alcohol wash. Most gaming printers end up with one standard bottle and one ABS-like bottle on the shelf.
Can I use these resins in any resin printer?
All five are photopolymer resins built around the 405 nm wavelength standard used by LCD, MSLA, DLP, and SLA printers. The water-washable pick lists a wider 365–405 nm range. Check your printer manual for its light source and confirm compatibility before ordering, since a small number of machines use a different wavelength.
Do I need isopropyl alcohol to clean prints?
Four of the five picks wash in isopropyl alcohol, which is the standard routine for photopolymer resin. The ANYCUBIC Water Washable 2.0 pick rinses in water instead. Either way, never pour wash liquid down a drain: cure it in sunlight or under a UV lamp first, then dispose of the solid waste under your local hazardous-waste rules.
How should I store resin and handle waste?
Keep bottles sealed, upright, and away from light and heat, and keep them out of reach of children and pets. Cure leftover liquid resin and wash water before disposal, and treat cured waste as hazardous waste under your local rules. Wear nitrile gloves whenever you handle liquid resin or uncured prints.
Conclusion
The best resin for gaming miniatures is the one that matches how the finished piece will be used. ELEGOO Standard Grey and ANYCUBIC Standard Grey cover everyday printing with clean detail and reliable curing. Siraya Tech Fast ABS-Like and SUNLU ABS-Like add the toughness that gaming pieces need to survive the table. ANYCUBIC Water Washable 2.0 simplifies cleanup without changing the print. All five are 1000 g bottles of grey 405 nm photopolymer resin, so any of them fits a standard resin printer workflow. Pick the formula that fits the job, handle the liquid with gloves and ventilation, and cure your waste before it leaves the bench.
FAQ
What kind of resin is best for gaming miniatures?
Can I use these resins in any resin printer?
Do I need isopropyl alcohol to clean prints?
How should I store resin and handle waste?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.




