Our Top Picks
Mounting Dream Soundbar Mount Bracket Fits Most ofSoundbar Mount Up to 15 lbs2.4 poundsCheck on Amazon
ECHOGEAR Soundbar Wall Mount for Speakers up to5 x 3 x 4 inches5 x 3 x 4 inches1 poundsCheck on Amazon
Universal Soundbar Mount for TV Wall Bracketup to 13.2 lbs16.66 x 3.39 x 1.7 inches3.4 poundsCheck on Amazon
A soundbar on a media console can sound muffled, block the TV remote sensor, and crowd the shelf your console needs. Mounting the bar fixes all three: dialogue sits at ear level, the bar clears the screen, and the console top stays free for controllers and headsets. A mounted bar also stays aligned with the screen, so game audio tracks the picture.
The catch is fit: brackets that bolt to the TV’s VESA holes, brackets that fix to the wall under the TV, and no-drill shelves that rest on top of the TV. Weight limits here run from 13.2 lb to 20 lb, and a bar heavier than its bracket will sag or fall. The five mounts below cover every common layout.
As an Amazon Associate, we earn from qualifying purchases.
How to Choose a Soundbar Mount for a Gaming Setup
Start with the mount type. A TV-attach bracket bolts to the TV’s VESA holes, usually sharing the bolts with the TV wall mount, so the bar moves with the screen when a full-motion mount swings out. A wall mount fixes the bar to the wall under the TV instead, independent of the TV mount, which suits fixed TVs. A no-drill TV top shelf rests on top of the TV and needs no holes at all, the renter-friendly option for a flat TV top and a light bar.
Weigh the bar, then check the limit. Every mount has a stated maximum load, and the bar’s weight must stay under it. The limits here run from 13.2 lb to 20 lb, so a compact bar fits anywhere while a long Atmos bar may only fit the two heaviest-rated brackets. When a listing headline and the maker’s manual disagree, trust the manual’s lower figure.
Match the VESA pattern. TV-attach brackets list a horizontal VESA range, such as 75 to 600 mm. Measure your TV’s mounting holes before ordering; outside the bracket’s range, the arms cannot reach.
Mind Dolby Atmos clearance. Up-firing drivers bounce sound off the ceiling only when they sit forward of the TV face. A depth-adjustable mount pushes the bar out from the wall so the TV does not block the upward sound. For an Atmos bar, depth adjustment is a requirement.
Check the wall and the bar’s holes. Wall mounts need the right anchor: drywall anchors are for drywall only, wood studs take screws directly, and concrete or brick needs its own hardware kit. On the bar, holes may sit on the back, the bottom, or nowhere at all; hook-style brackets cover back and bottom holes, shelf-style holders carry bars with no holes.
1. Mounting Dream MD5420 — Best TV-Attach Bracket for Most Setups
The Mounting Dream MD5420 is the bracket to buy when the TV is already wall-mounted and you want the bar to follow the screen. Two long arms bolt to the TV’s VESA holes and hold the bar above or below the screen, so it swings with a full-motion mount, tilts with a tilting mount, and stays put with a fixed mount, all without new holes in the wall.
The detachable long extension plates swivel through 180 degrees, so the same pair of arms holds the bar under the TV or above it. Three ways to hold the bar cover nearly every layout: back holes, keyhole slots, or two included L-shaped feet when the bar’s threaded holes face down.
The limit is 15 lb, which covers most compact and mid-size bars; weigh a long Atmos bar first, since a heavy enclosure can exceed it. Mounting Dream steers Sonos Beam owners to its MD5426 bracket instead, so Beam owners should look there.
Specs
- Type: TV-attach arms, above or below the TV
- Max load: 15 lb (6.8 kg)
- TV VESA: 200×100 to 600×400 mm
- Extension plates: detachable, 180-degree swivel
- Arm lengths: 262, 352, and 525 mm
- Bar attachment: back holes, keyhole slots, or L-shaped feet
- Works with: fixed, tilt, and full-motion TV wall mounts
- Dimensions: 22.17 x 0.45 x 1.73 in
- Weight: 2.4 lb
- ASIN: B01DW1XOCY
2. ECHOGEAR Soundbar Wall Mount EGAV-SSBWM1 — Best Wall Mount for Dolby Atmos Bars
The ECHOGEAR EGAV-SSBWM1 is the only wall mount in this guide and the strongest, rated to 20 lb. Two adjustable cradles fix to the wall under the TV; the bar sits on them shelf-style or screws in from below with M4, M5, or M6 screws.
Depth adjustment is the reason to pick this one for an Atmos bar: the cradles adjust from 3.6 to 6.6 inches out from the wall, so an up-firing bar sits forward of the TV face where its ceiling-bounced sound is not blocked.
Two details deserve attention. The mount stays on the wall when a full-motion TV swings out, so the bar and the screen separate on an articulating mount. Also, the included drywall anchors are for drywall only, and concrete installation needs the separate EGHWLB hardware kit.
Specs
- Type: wall mount under the TV
- Max load: 20 lb (9.0 kg)
- Depth adjustment: 3.6 to 6.6 in from the wall
- Bar attachment: bottom screws (M4, M5, M6) or shelf-style for bars without inserts
- Wall types: drywall and wood studs included; concrete needs the separate EGHWLB kit
- Dimensions: 5 x 3 x 4 in
- ASIN: B088FYFMXR
3. USX MOUNT Universal Soundbar Mount XAS004 — Best Lockable Hooks for a Secure Hold
The USX MOUNT XAS004 is built around two removable and lockable hooks that grip the bar’s back or bottom holes, so the bar cannot swing or slide once set. Two flexible arms adjust in height, and the hooks slide left and right for centering. The bracket bolts to the TV’s VESA holes, above or below the screen, with no drilling into the wall.
The VESA range is generous: horizontal patterns from 75 to 600 mm cover small TVs that narrower brackets miss, and soundbar holes up to 8 inches from center on each side fit the hooks. The kit includes hooks, bars, TV screws, spacers, and soundbar hardware, backed by 10 years of US-based customer service.
The trade-off is the weight limit: at 13.2 lb, the XAS004 has the lowest rated load in this guide, tied with the Perlegear’s manual figure. It suits compact and mid-size bars; a heavy Atmos bar belongs on the ECHOGEAR or the Mounting Dream instead.
Specs
- Type: TV-attach, above or below the TV
- Max load: 13.2 lb (6 kg)
- TV VESA: horizontal 75 to 600 mm
- Hooks: two removable and lockable hooks for back or bottom holes
- Adjustment: height-adjustable arms, hooks slide left and right for centering
- Soundbar hole range: up to 8 in from center on each side
- Dimensions: 16.66 x 3.39 x 1.7 in
- Weight: 3.34 lb
- Service: 10-year US-based customer service
- ASIN: B08HQP57VZ
4. Perlegear Soundbar Mount PGSM03B — Best for Bars With or Without Mounting Holes
The Perlegear PGSM03B covers the widest range of bars because it works with soundbars that have mounting holes and soundbars that do not. A non-slip base holder extends from 3.5 to 6 inches, and twisting bracket locks with EVA pads keep the bar stable. Bars with holes bolt on; bars without holes rest on the padded base.
The mount attaches to the TV or to the wall. TV-attached, it fits horizontal VESA patterns from 150 to 600 mm and hangs the bar under the screen; wall-mounted, it holds the bar independently of the TV mount.
One figure needs a plain statement: the listing headline says 15 lb, but Perlegear’s own manual caps the load at 13.2 lb (6 kg). This guide uses the manual’s figure, the maker’s safety document and the safe limit. Pick the ECHOGEAR if the bar weighs more, and do not confuse this model with the PGSM04B, a separate listing with tool-free height adjustment.
Specs
- Type: TV-attach or wall mount
- Max load: 13.2 lb (6 kg) per the manual; listing headline says 15 lb
- Base holder: non-slip, extends 3.5 to 6 in
- Bar fit: soundbars with or without mounting holes
- TV VESA: horizontal 150 to 600 mm
- Locks: twisting bracket locks with EVA pads
- Weight: 3.69 lb
- ASIN: B0CW8JLKBL
5. Vogel’s Sound 3550 — Best Premium Bracket for Sonos and Bose Bars
The Vogel’s Sound 3550 is the premium pick, and the one to choose when the bar is a Sonos Arc, Sonos Beam, Sonos Playbar, or Bose Soundbar 500 or 700. Vogel’s lists those models by name alongside Samsung, Sony, LG, and JBL. It bolts to the TV’s VESA holes from 100 to 600 mm and pairs with a full-motion TV wall mount, so the bar turns with the TV and the sound follows the screen.
Build quality is the argument for the higher tier: black steel and aluminium, a 5-year manufacturer warranty, and TÜV certification. Height is adjustable, and the box includes cable clips, a TV fasteners kit, and an Allen key.
The weight limit needs a plain statement: the Sound 3550 is rated to 14.3 lb (6.5 kg), the maker’s figure; some listing copy rounds it up to 15 lb, but 14.3 lb is the real ceiling. That covers the Sonos Beam and most Bose bars, but not every heavy bar; a long Atmos bar over 14 lb needs the ECHOGEAR instead.
Specs
- Type: TV-attach, pairs with a full-motion TV wall mount
- Max load: 14.3 lb (6.5 kg)
- TV VESA: 100 to 600 mm
- Named fit: Bose Soundbar 500 and 700, Sonos Arc, Arc Ultra, Beam, and Playbar, plus Samsung, Sony, LG, and JBL
- Material: black steel and aluminium
- Adjustment: height adjustable
- Warranty: 5 years, TÜV certified
- Dimensions: 16.73 x 4.21 x 1.38 in
- Weight: 3.1 lb (1.4 kg)
- In the box: cable clips, TV fasteners kit, Allen key
- ASIN: B07X2KTH2G
Soundbar Mount Comparison
| Mount | Type | Max load | Best for |
|---|---|---|---|
| Mounting Dream MD5420 | TV-attach | 15 lb | Most wall-mounted TVs |
| ECHOGEAR EGAV-SSBWM1 | Wall | 20 lb | Heavy and Dolby Atmos bars |
| USX MOUNT XAS004 | TV-attach | 13.2 lb | Lockable hooks, wide VESA range |
| Perlegear PGSM03B | TV-attach or wall | 13.2 lb | Bars with no mounting holes |
| Vogel’s Sound 3550 | TV-attach | 14.3 lb | Sonos and Bose bars |
The ECHOGEAR is the only pick rated to 20 lb, so it takes the heaviest bars and the Atmos bars that need depth adjustment. The USX MOUNT and the Perlegear both cap at 13.2 lb, the USX on lockable hooks and VESA range, the Perlegear on bars with no holes. The Vogel’s is the pick for named Sonos and Bose fit, as long as the bar stays under 14.3 lb.
FAQ
Can I mount a soundbar above the TV instead of below it?
Yes, with a TV-attach bracket that supports it. The Mounting Dream MD5420 and the USX MOUNT XAS004 both hang the bar above or below the screen, and the Mounting Dream’s extension plates swivel 180 degrees to switch between the two. Above-TV mounting suits rooms where the TV sits high, but keep the bar close to the screen so dialogue stays anchored to the picture.
Do I need a wall-mounted TV to use a TV-attach soundbar bracket?
Yes, in practice. A TV-attach bracket bolts to the TV’s VESA holes, the same holes a TV wall mount uses, so a TV on a stand leaves the bracket nothing to bolt to. For a TV on a stand, a wall mount fixed under the TV or a no-drill TV top shelf is the right choice instead.
Will a soundbar mount work with a Dolby Atmos soundbar?
Yes, as long as the mount gives the bar’s up-firing drivers a clear path to the ceiling. The ECHOGEAR EGAV-SSBWM1 is the strongest choice here: its depth adjusts from 3.6 to 6.6 inches, pushing the bar forward of the TV face so the TV does not block the upward sound.
What if my soundbar has no mounting holes?
Pick a shelf-style holder. The ECHOGEAR EGAV-SSBWM1 carries bars with no threaded inserts on its cradles, and the Perlegear PGSM03B holds them on a non-slip base holder with twisting locks and EVA pads. Both work without a single screw into the bar.
Conclusion
The best soundbar mount for a gaming setup matches the bar’s weight, the TV’s VESA pattern, and the wall. The Mounting Dream MD5420 fits most wall-mounted TVs, the ECHOGEAR EGAV-SSBWM1 takes the heaviest and Atmos bars, the USX MOUNT XAS004 locks a light bar in place, the Perlegear PGSM03B covers bars with no mounting holes, and the Vogel’s Sound 3550 is the premium fit for Sonos and Bose bars. Weigh the bar, measure the VESA holes, and check the wall type.
FAQ
Can I mount a soundbar above the TV instead of below it?
Do I need a wall-mounted TV to use a TV-attach soundbar bracket?
Will a soundbar mount work with a Dolby Atmos soundbar?
What if my soundbar has no mounting holes?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

